Volumes & Issues
International Journal of Advanced Biomedicine (AB) is an international, peer-reviewed scientific journal dedicated to the publication of high-quality research in biomedicine and biotechnology. The journal promotes interdisciplinary research that bridges the gap between basic science and clinical practice, with particular emphasis on translational and clinical research. Its scope encompasses a broad range of biomedical fields, including oncology, cardiology, endocrinology, and other branches of medicine. It also focuses on personalized medicine, molecular mechanisms, cellular signaling pathways, targeted therapies, and innovative approaches that contribute to the advancement of biomedical science and healthcare.
The journal welcomes original research articles, review papers, clinical studies, translational research reports, and meta-analyses that advance scientific knowledge and support the development of new diagnostic, therapeutic, and preventive strategies. Its aim is to foster collaboration across basic, applied, and clinical research, encouraging interdisciplinary approaches that translate scientific discoveries into practical medical applications. The International Journal of Advanced Biomedicine provides a platform for researchers and healthcare professionals to share innovative findings, improve understanding of disease mechanisms, and contribute to advances in personalized medicine, biotechnology, and patient care.
Information for authors
Aims and Scope:
The International Journal of Advanced Biomedicine (AB) aims to publish high-quality original research, review articles, clinical studies, and translational research reports that advance knowledge in biomedicine, biotechnology, and biomedical engineering. The journal encourages interdisciplinary research that bridges basic science, applied research, engineering innovation, and clinical practice, with particular emphasis on translating scientific discoveries into practical healthcare applications. It welcomes contributions that promote advances in disease diagnosis, treatment, prevention, medical technologies, and personalized medicine.
The journal covers a broad range of biomedical and engineering disciplines, including, but not limited to:
- Basic, applied, translational, and clinical biomedical research
- Oncology, cardiology, endocrinology, neurology, and other medical specialties
- Molecular biology, cellular biology, genetics, and epigenetics
- Personalized medicine, precision medicine, and pharmacogenomics
- Molecular signaling pathways and mechanisms of disease
- Targeted therapies, drug discovery, and therapeutic development
- Biomedical engineering and medical device development
- Bioengineering and tissue engineering
- Biomaterials, biocompatible materials, and regenerative medicine
- Nanotechnology and nanomedicine
- Biomedical instrumentation, sensors, and biosensors
- Medical imaging, image processing, and diagnostic technologies
- Artificial intelligence, machine learning, and computational methods in medicine
- Bioinformatics, computational biology, and systems biology
- Biotechnology, genetic engineering, and molecular diagnostics
- Drug delivery systems and controlled-release technologies
- Biomechanics, rehabilitation engineering, and assistive technologies
- Wearable medical devices, remote monitoring, and digital health
- Health data science, medical informatics, and clinical decision-support systems
- Bioprocess engineering and pharmaceutical biotechnology
- Clinical trials, evidence-based medicine, and meta-analysis
- Regenerative therapies, stem cell research, and tissue repair
- Microfluidics, lab-on-a-chip technologies, and point-of-care diagnostics
- Medical robotics and computer-assisted surgery
- Healthcare technology assessment, biomedical innovation, and engineering solutions for clinical practice
The journal encourages interdisciplinary contributions integrating medicine, biology, engineering, materials science, chemistry, computer science, and data analytics. Research involving experimental investigation, mathematical modeling, computational simulation, engineering design, optimization, and clinical validation is particularly welcome. The journal also supports the development of innovative biomedical technologies, diagnostic platforms, therapeutic systems, and sustainable healthcare solutions that address unmet medical needs.
Through the integration of fundamental biomedical research and engineering applications, the International Journal of Advanced Biomedicine seeks to facilitate collaboration among scientists, engineers, clinicians, and healthcare professionals. Its overall objective is to accelerate scientific discovery, promote technological innovation, and support the translation of research findings into improved diagnostic methods, effective treatments, and better patient outcomes.
EDITORS-IN-CHIEF
Dr. ISA MARTE HUSSAINI
Department of Pharmacology, Faculty of Pharmacy, University of Maiduguri, PMB 1069, Bama Road, Maiduguri, Nigeria
Email: imh5c@virginia.edu
Phone: +234 08067087023
Dr. Abduh Elbanna
Alhosain Azhar University Hospital, Cairo, Egypt
Phone: +20235837623, +20237811351
Email: abduhelbanna@hotmail.com, abduhelbanna@azhar.edu.eg
MANAGING EDITORS
Dr. Seddik Hammad
Department of Medicine II, Section Molecular Hepatology, Medical Faculty Mannheim, Heidelberg University, 68167 Mannheim, Germany
Email: Seddik.hammad@medma.uni-heidelberg.de
Dr. Boitumelo V. Kgarebe
National Institute for Occupational Health, Johannesburg, South Africa
Email: bkgarebe@gmail.com
Phone: +27820929457; +27 11 712 6410
Fax: +27 11 712 6533
EDITORIAL BOARD
Ahmad Telfah
ISAS-Institute for Analytical Sciences, Bunsen-Kirchhoff-Str. 11, 44139 Dortmund, Germany
Email: Telfah.ahmed@gmail.com
Ahmed A.A. Abdel-Wareth
Department of Animal and Poultry Production, Faculty of Agriculture, South Valley University, 83523 Qena, Egypt
Email: a.wareth@agr.svu.edu.eg
Ahmed M. Kotb
Department of Anatomy and Cell Biology, University Medicine Greifswald, 17487 Greifswald, Germany
Email: kotba@uni-greifswald.de
Alsagher Omran Ahmed Ali
Department of Veterinary Medicine, University of Cambridge, Cambridge CB3 0ES, United Kingdom; South Valley University, Qena, Egypt
Email: alsagher.ali@vet.svu.edu.eg
Eman Elmadany
Faculty of Medicine, Sohag University, Egypt
Email: eman_elmadany@yahoo.com
Banu Cahide Tel
Department of Pharmacology, Faculty of Pharmacy, Hacettepe University, 06100 Sihhiye, Ankara, Turkey
Email: banutel@hacettepe.edu.tr
Boitumelo V. Kgarebe
National Institute for Occupational Health, South Africa
Email: bkgarebe@gmail.com
Elhussein E. Mahmoud
Institute of Biomedical and Health Sciences, Hiroshima University, Hiroshima 734-8551, Japan
Email: E.badry@vet.svu.edu.eg
Esraa Albarahmieh
Department of Pharmaceutical Chemical Engineering, School of Applied Medical Sciences, German Jordanian University, 11180 Amman, Jordan
Email: Israa.Barahmieh@gju.edu.jo
Hoda Yousry Abdallah
Medical Genetics, Genetics Unit, Department of Histology and Cell Biology, Faculty of Medicine, Suez Canal University, Ismailia, Egypt
Email: hoda_usry@yahoo.com, hoda_ibrahim1@med.suez.edu.eg
Ibrahim A. I. Hassan
Department of Chemistry, Faculty of Science, South Valley University. Academic visitor at the University of Bath, University of Exeter, and Brunel University, United Kingdom
Email: I.Hassan@bath.edu
Mohammed Ezzeldien
Department of Physics, Faculty of Science, South Valley University, 83523 Qena, Egypt
Email: mm_ezz@yahoo.com
Mohie Haridy
Department of Pathology and Clinical Pathology, Faculty of Veterinary Medicine, South Valley University, 83523 Qena, Egypt
Email: mohieharidy@svu.edu.eg
Nour Eissa
Department of Immunology, College of Medicine, University of Manitoba, 471 Apotex Centre, 750 McDermot Avenue, Winnipeg, MB R3E 0T5, Canada
Email: Nour.Eissa@umanitoba.ca
Vikas Kumar
Division of Aquaculture, College of Agriculture, Food Science and Sustainable Systems, Kentucky State University, 103 Athletic Road, Frankfort, KY 40601, USA
Email: vikas.kumar@kysu.edu
Yasser Said El-Sayed Salem, Prof.
Department of Forensic Medicine and Toxicology, Faculty of Veterinary Medicine, Damanhour University, 22511 Damanhour, Egypt
Email: elsayedys@vetmed.dmu.edu.eg
Zhi-Gang Shen
Aquaculture Genetics and Breeding Laboratory, The Ohio State University South Centers, Piketon, OH 45661, USA
Email: Shen.529@osu.edu
ASSISTANT EDITORS
Ahmed M.M.A. Elsherief
Department of Urology, Faculty of Medicine, Sohag University, Egypt
Email: ahmedelsherief@yahoo.com
Elsayed Mickdam
Ruminant Nutrition Institute of Animal Nutrition and Functional Plant Compounds, Department for Farm Animals and Veterinary Public Health, University of Veterinary Medicine Vienna, Austria
Email: elsayed.mickdam@vetmeduni.ac.at
Mohamed A.M. Moustafa
Hokkaido University, Graduate School of Veterinary Medicine, Wildlife Biology and Medicine, Sapporo, Hokkaido, Japan
Email: M.abdallah@vet.hokudai.ac.jp
Mohammed F. Abdallah
Department of Pharmaceutical Toxicology, Faculty of Pharmacy, Hacettepe University, Turkey
Email: mohamed.fathi@hacettpe.edu.tr
Obeid Shanab
Department of Medical Sciences, Tumour and Cellular Biochemistry Division, Medical College, University of Miyazaki, Japan
Email: Shanab.bio@vet.svu.edu.eg
Omar Bauomy Ahmed
Institute of Pathology, University Hospital Charité, Berlin, Germany
Email: omar.ahmed@charite.de
Dr. Muthanna Samara
CPsychol AFBPsS, Department of Psychology, Kingston University London, Penrhyn Road (EM334), United Kingdom
Email: M.Samara@Kingston.ac.uk
Phone: +44 (0) 20 8417 2533
Dr. Shereen Ismail
Comparative Anatomy and Embryology, Mansoura University, Mansoura, Dakahlia, Egypt
Email: shereen_elsayedmohamed@yahoo.com
Phone: 00201010777264
Dr. Ali Abd-Ellah
Institute of Pathology, Ulm University, Germany
Email: Drali.abdallah@med.svu.edu.eg
International Journal of Advanced Biomedicine is covered by the following services:
- Dimensions
- OpenAlex
- Google Scholar
- Semantic Scholar
- BASE
- ROAD
- Naver Academic
- Baidu Scholar
- JournalTOCs
- JournalGuide
- EBSCO
- Index Copernicus (ICI Journal Master List)
- Cosmos Impact Factor
- OpenCitations
- SCILIT
- OpenAIRE
Additionally, the journal is registered with Crossref for DOI registration and metadata deposits.
Submission Guidelines
Manuscripts submitted to International Journal of Advanced Biomedicine (AB) must be original contributions and must not be under consideration for publication elsewhere. The journal accepts original research articles, review articles, and short communications.
Language
All manuscripts must be written in English. Authors who are non-native English speakers are strongly encouraged to have their manuscripts reviewed by a native English speaker before submission.
Manuscript File Formats
Manuscripts may be submitted in PDF, DOC, DOCX, or LaTeX (.tex / .zip) format. Where applicable, supplementary files should be included in a single ZIP archive. The maximum file size is 50 MB.
Manuscript Templates
Authors are strongly encouraged to use the official AB LaTeX template or Word template available from the journal website. Authors should always use the most current version of the appropriate template when preparing their manuscript.
Manuscript Structure
Original research articles should include the following sections in the indicated order: Title, Author(s) and Affiliation(s), Abstract, Keywords, Introduction, Methods, Results, Discussion, Conclusion, Acknowledgements (if applicable), Conflict of Interest statement, and References.
Title, Authors and Affiliations
The manuscript should begin with the title of the article, followed by the full names of all authors and their institutional affiliations.
Abstract
The abstract must contain between 50 and 3000 words. It must be self-contained and should concisely state the purpose of the study, the methods or approach used, the principal results, and the major conclusions. The abstract must not contain references, abbreviations, or mathematical formulae.
Keywords
Authors should provide 4 to 8 keywords that accurately reflect the content of the manuscript. Keywords should not already be included in the article title.
Introduction
The Introduction should clearly define the research problem, provide the necessary scientific background, and explain the motivation and relevance of the study. Relevant published research should be appropriately discussed and cited, and the contribution of the present work should be clearly identified.
Methods
The Methods section should provide a clear description of the mathematical, theoretical, computational, analytical, or experimental methods used in the study. Mathematical formulations, assumptions, models, algorithms, and procedures should be presented with sufficient detail to allow the work to be understood and, where applicable, reproduced.
Results
The Results section should clearly present the principal findings of the research. Mathematical results, analytical findings, computational results, numerical experiments, and other relevant outcomes should be presented systematically using appropriately numbered equations, figures, and tables.
Discussion
The Discussion should provide a critical interpretation of the results and explain their significance in relation to the research problem and existing literature. Authors should highlight the main scientific contributions of the study and discuss relevant implications, limitations, and comparisons with previous research where appropriate.
Conclusion
The Conclusion should summarize the principal findings and clearly state the main scientific contribution of the work. Where appropriate, authors may also indicate possible directions for future research.
Acknowledgements
An Acknowledgements section may be included where applicable.
Figures and Tables
All figures and tables must be numbered consecutively and provided with descriptive captions. Figures should be supplied at a minimum resolution of 300 dpi for photographs and 600 dpi for line drawings. All figures should be embedded within the manuscript file.
Mathematical Expressions
All mathematical expressions and equations should be numbered and typeset clearly. Standard mathematical notation should be used wherever possible. Non-standard symbols must be defined at their first occurrence.
Abbreviations and Symbols
All abbreviations, acronyms, and non-standard symbols must be defined when they are first introduced in the manuscript.
References
References must be numbered consecutively according to their first appearance in the text and listed in the same order at the end of the manuscript. In-text citations should appear as superscript numbers or in square brackets, for example [1] or [1,2,5–7].
Journal Article
Author(s) (Year). Article title. Journal Name, Volume(Issue), pp. Start–End. DOI.
Book
Author(s) (Year). Title of Book. Publisher, Place of publication.
Chapter in a Book
Author(s) (Year). Chapter title. In: Editor(s) (Eds.), Title of Book, pp. Start–End. Publisher.
Authors should provide DOIs wherever available. References to unpublished work, personal communications, or websites should be kept to a minimum.
Authorship
All listed authors must have made a genuine scientific contribution to the work. Ghost authorship and gift authorship are not permitted. The corresponding author is responsible for ensuring that all co-authors have approved the final manuscript and agreed to its submission.
Originality
Submission of a manuscript implies that the work has not been published previously, except where permitted for an abstract or conference paper, is not under consideration by another journal, and has been approved for submission by all authors. Plagiarism in any form is unacceptable and may result in immediate rejection.
Conflict of Interest
Authors must disclose any financial or personal relationships that could inappropriately influence the submitted work. If no conflicts exist, authors should include the following statement: "The authors declare no conflict of interest."
Ethical Approval
Where applicable, studies involving human participants or animals must include a statement confirming that appropriate ethical approval was obtained.
Data Availability
Authors are encouraged to make their research data available as supplementary material or through an appropriate open repository and to include a data availability statement in the manuscript where applicable.
Peer Review Process
This journal follows a double-blind peer-review process. Manuscripts are initially screened by the Editor-in-Chief for scope and overall quality. Manuscripts that pass the initial screening are sent to at least two independent expert reviewers.
Double-Blind Peer Review
In the double-blind peer-review process, the identities of both the authors and reviewers are concealed throughout the review process. This approach is intended to reduce potential bias and ensure that manuscripts are evaluated primarily on their scientific quality, originality, methodological rigor, significance, and contribution to the field.
Peer Review Criteria
Reviewers evaluate manuscripts according to their scientific quality, originality, relevance to the journal's scope, significance of the contribution, methodological rigor, clarity of presentation, and compliance with appropriate academic standards.
Reviewers
Manuscripts that pass the initial editorial screening are evaluated by at least two independent expert reviewers. Reviewers are selected according to the subject area and scientific expertise required to assess the manuscript.
Editorial Decisions
Following the peer-review process, authors may receive one of the following decisions: Accept, Minor Revision, Major Revision, or Reject.
Review Time
The typical review time is approximately 6–10 weeks. The actual processing time may vary depending on the availability of suitable reviewers and the complexity of the manuscript.
Revised Manuscripts
When submitting a revised manuscript, authors must provide a point-by-point response addressing all reviewer comments and explaining the changes made to the manuscript. Revised manuscripts that do not adequately respond to the reviewers' concerns may be returned without further review.
Publication Fee / APC
No Article Processing Charge (APC) is required. Publication in International Journal of Advanced Biomedicine is free of charge for authors. Authors are not required to pay a publication fee for accepted manuscripts.
Copyright
Copyright and publishing rights remain with the authors unless otherwise agreed in writing. By submitting a manuscript, authors confirm that they have the right to submit and publish the work and that publication of the manuscript does not infringe the rights of any third party.
Submission System
All manuscripts must be submitted through the Cervantes editorial management system. Authors should submit their manuscripts through the AB online submission system. Authors who are submitting for the first time should register for an account before submitting their manuscript.
Submission Requirements
Before submission, authors should ensure that the manuscript follows the journal's formatting requirements, contains all required sections, includes appropriate references, and has been approved for submission by all listed authors.
Contact Information
For enquiries regarding manuscript preparation or the submission process, please contact the editorial office at ab-journal@engineering-journals.org.
COPE Standards
This journal follows the ethical standards and Core Practices established by the Committee on Publication Ethics (COPE). Editors, authors, and reviewers are expected to comply with these principles, which promote transparency, integrity, and responsible conduct in scholarly publishing.
Zero Tolerance for Malpractice
The editorial board maintains a zero-tolerance policy toward publication malpractice. Submissions may be rejected if authors have committed serious ethical violations, including, but not limited to, plagiarism, duplicate submission, data fabrication, or other forms of academic misconduct.
Plagiarism Policy
The editorial board is participating in a growing community of Similarity Check System’s users in order to ensure that the content published is original and trustworthy. Similarity Check provides comprehensive manuscript screening to detect plagiarism and maintain a high standard of quality throughout the peer-review process.
Author Accountability and Verification
Authors are fully responsible for the accuracy, originality, and integrity of all submitted work, including any content edited or assisted by AI technologies. All manuscripts undergo an initial screening using specialized software to detect plagiarism and identify the undisclosed use of generative AI.
AI Guidelines for Authors (Simple Assistants)
Authors may use simple AI-assisted tools for limited purposes such as grammar correction, language translation, text formatting, or verification of statistical analyses. The use of these tools does not require disclosure, provided they do not generate original scientific content.
AI Guidelines for Authors (Generative AI)
Generative AI tools capable of producing original content, including manuscript text, literature reviews, tables, figures, or reference lists, must not be used to create the scientific content of a manuscript. Such tools may only be used for language editing, assistance with data analysis, or stimulus generation. If generative AI is used for these permitted purposes, authors must include a Disclosure of the Use of AI section describing the tools employed and their specific role in preparing the manuscript.
AI Guidelines for Reviewers and Editors
Editors and reviewers may use simple AI-assisted tools to improve the language of their reports or verify statistical analyses without disclosure. However, the use of generative AI to produce peer-review reports, editorial decisions, or manuscript evaluations is strictly prohibited to preserve the integrity and confidentiality of the review process.
Blind Peer Review
This journal follows a blind peer-review process in which submitted manuscripts are evaluated by independent experts without revealing the identity of the authors. This approach helps reduce bias and ensures that each manuscript is assessed solely on its academic quality, methodology, originality, and contribution to the field.
Open Access Statement
This is an open access journal that provides free, immediate, and unrestricted online access to all its published content for readers around the world.
Archiving
Engineering Journals archives the contents of this journal in Portico, a trusted digital preservation service that ensures the long-term accessibility and preservation of scholarly books, journals, and collections.
Published by: Engineering Journals



