Applied Mathematics and Nonlinear Sciences
Journal license

Journal

Applied Mathematics and Nonlinear Sciences


Volume
& Issue

Volume 9, Issue 1


Published
on

February 26, 2024


Pages


DOI

Article

Eight-link pressure mechanism and its dynamic simulation based on improved ant colony algorithm optimization


Authors

Song Liu Affiliation:
School of Intelligent Manufacturing, Anhui Wenda Information Engineering College, Hefei Anhui, 231201, China.


Abstract

In recent years, the optimization of eight-link pressure mechanism using ant colony algorithm is a research hotspot, but given the limitations of traditional ant colony algorithm, this paper improves the ant colony algorithm based on the SSA-IACO algorithm and develops the application and analysis of eight-link pressure mechanism and its dynamic simulation. Through the study of parameter settings before and after optimization, simulation analysis and other aspects, it is concluded that: the efficiency of the new scheme optimized by the improved ant colony algorithm is 88.86% higher than the original scheme. The stator power is reduced by 4.10% and the power factor is increased by 14.67% on average over the original scheme. The maximum magnitude of the free end torsion angle of the crankshaft system is 0.16 degrees, and the increased resonance speed is about 1800 rpm. The maximum torsion angle of the main harmonic (6th harmonic) is reduced from 0.54 to 0.16, and the damping effect is noticeable. When 0.7 ≤ ρ 0.8, and ρ is close to 0.7, the algorithm performs better. When 0.15 ≤ θ 0.2, and the value of θ is more comparable to 0.15, the algorithm obtains the optimal solution and the execution time is shorter than the [0.7,0.2] combination.


Keywords

Ant colony algorithm, SSA-IACO algorithm, Improvement, Eight-link pressure structure, Dynamic simulation, 94A08


Citation

Liu, S. (2024). Eight-link pressure mechanism and its dynamic simulation based on improved ant colony algorithm optimization. Applied Mathematics and Nonlinear Sciences, 9(1). https://doi.org/10.2478/amns-2024-0458

Published by: Engineering Journals

Engineering Journals Logo